Extended studs 12x2

20pc Extended Tuner Race Lug Nuts - 12x1.25 Thread Size - Open End - Cone Conical Taper Acorn Seat (60 degree) - 2" Length - Neochrome Neochro Neo-Chrome - for Nissan Infiniti Subaru More

Buy extended studs 12x2
Check Price on Amazon
Buy extended studs 12x2 from Amazon.com

Description:

Product Specifications:
Nut Height: 2" (50mm)
Hex Size: 19mm or 3/4"
Thread Pitch: 12x1.25

Applications:
Can fit on 4-Lug and 5-Lug Vehicles that use 12x1.25 Thread Pitch studs - Nissan, Infiniti, Scion, Subaru

*** IMPORTANT: Check before purchasing ***
- Your vehicle must have 12x1.25 threaded studs.
- Your wheels' lug holes must have conical / 60 degree cone / taper / acorn seat.
- Ensure these lug nuts are the proper size. Compare the length/width of these lug nuts (diagram can be found in the images section) to the nuts you are currently using.

Buy extended studs 12x2 from Amazon.com
  • APPLICATIONS Many Nissan, Infiniti, and Subaru vehicles with 12x1.25 threaded studs. Will NOT work for Honda, Acura, Toyota, Lexus, Kia, Hyundai, Ford, Chevrolet, Jeep.
  • SPECIFICATIONS Pack of 20 Total Length: 2" (50mm) Seat Type: Cone Seat Thread Size & Pitch: 12x1.25 Color: Neochrome See Diagram Image for Details.
  • CHECK NUT SIZE Ensure these lug nuts are the proper size. Compare the length/width of these lug nuts (diagram can be found in the images section) to the nuts you are currently using.
  • NUT THREAD SIZE & SEAT (1) Verify the thread size of the nuts on your vehicle. Various years/models come with different thickness nuts and thread pitches. (2) There are a variety of "Lug Seats", please make sure your wheels take Cone Seat shaped nuts.
  • IMPORTANT NOTE The socket key requires a 25mm clearance, meaning that your vehicle's wheel hole needs to be at least 25mm (1") in diameter. Please double check this before purchasing to ensure a smooth installation.





Buy extended studs 12x2 from Amazon.com


Muteki 32906T SR Series Chrome Titanium 12mm x 1.5mm SR48 Open End Lug Nut Set, (Set of 20)

Buy extended studs 12x2
Check Price on Amazon
Buy extended studs 12x2 from Amazon.com

Description:

This lug nut is constructed of chrome vanadium 50BV30 for superior durability.

Buy extended studs 12x2 from Amazon.com
  • Extended 48 millimeter length open ended design with knurled ends; can be removed with a 17 millimeter socket
  • Each SR48 lug weighs just under 2 ounces
  • Extended 48mm length open ended design with knurled ends
  • Can be removed with a 17mm socket
  • SR48 lugs weigh just under 2 ounces
Buy extended studs 12x2 from Amazon.com


20pc Chrome Silver Bulge ET Extended Thread Lug Nuts, Metric 12x1.5 Thread, 1.75" Length, Cone Conical Taper Seat Shank Closed End - for many Chevy Buick Chrysler Dodge GMC Pontiac

Buy extended studs 12x2
Check Price on Amazon
Buy extended studs 12x2 from Amazon.com

Description:

Product Specifications:
Total Nut Length: 1.75 inches
Shank Length: 8mm (0.31")
Shank Diameter: (15.5mm (0.61")
Hex Size: 19mm or 3/4"
Thread Pitch: 12x1.5

Applications:
Fits on 4-Lug and 5-Lug Vehicles that use 12x1.5 Thread Pitch studs - Acura, Chevrolet, Honda, Lexus, Mazda, Mitsubishi, Scion, Toyota.

*** IMPORTANT: Check before purchasing ***
- Your vehicle must have 12x1.5 threaded studs.
- Your wheels' lug holes must have conical / 60 degree cone / taper / acorn seat.
- Ensure these lug nuts are the proper size.  Compare the length/width of these lug nuts (diagram can be found in the images section) to the nuts you are currently using.
- Check vehicle's wheel stud length. If your wheel studs stick out past your wheel more than 38mm (about 1.5"), these will not work for you.

Buy extended studs 12x2 from Amazon.com
  • Authentic Precision European Motorwerks Lug Nuts (Pack of 20). Manufactured with cold forged steel. Additional Heat Treating ensures dependable strength & durability. Precisely machined threads ensure a perfect fit on your vehicle's wheel studs. Special coating provides exceptional corrosion resistance and appearance.
  • SPECIFICATIONS Total Length: 1.75 inches Seat Type: Conical ET Style Thread Size & Pitch: 12x1.5 Color: Silver / Chrome See Diagram Image for Details.
  • CHECK NUT SIZE Ensure these lug nuts are the proper size. Compare the length/width of these lug nuts (diagram can be found in the images section) to the nuts you are currently using.
  • WHEEL STUD LENGTH It is important to measure your vehicle's wheel stud length. If your wheel studs stick out past your wheel more than 38mm (about 1.5"), these will not be compatible.
  • NUT SIZE & SEAT (1) Verify the thread size of the nuts on your vehicle. Various years/models come with different thickness nuts and thread pitches. (2) There are a variety of "Lug Seats", please make sure your wheels take Conical ET Style shaped nuts.






Buy extended studs 12x2 from Amazon.com


YITAMOTOR Lug Nuts 12x1.5 Red, 6 Spline Bulge Acorn Wheel Lug Nuts 1.38" Tall Compatible for Ford Buick Toyota Mitsubishi Mazda Honda with 1 Key

Buy extended studs 12x2
Check Price on Amazon
Buy extended studs 12x2 from Amazon.com

Description:

Item specifics:

Quantity: Set of 20
Type:6Spline, Closed End
Seat Type: 60 Degree Conical
Nut Height: 2" inches
Thread Size: 9/16ths
Material: SCM 435 Steel (Heat Treated)
Construction: Through-Hardened Steel
Color: Chrome Plated
Thread Pitch: 9/16"-18


Note:

- This style of lug nut is used on aftermarket wheels that require a small diameter conical seat lug nut.
- The vehicle compatibility guide refers to the vehicles wheel stud thread size only.
- Always hand tighten spline lug nuts using two hands, one to hold and turn the wrench and the other to support the lug nut tool, improper upward/downward force along with the torque from tightening the lug can cause the tool to break. The manufacturer does not warranty broken lug nut tools.
- Please verify this is the correct style of lug nut for your wheels before ordering, if you have any questions please feel free to contact us.

Buy extended studs 12x2 from Amazon.com
  • NOTE: Please tighten the lug nuts manually, DO NOT use electrical tools. SPECS - Closed End Bulge Acorn 6 Spline Lug Nuts Red 1 Lug Nut Tool Key - M12x1.50 Thread Size - Conical 60 Degree Seat - 19mm Hex (3/4" Hex) - 1.38" (35mm) Overall Length - 8 Grade.
  • FITMENT - By matching this lug's specs (thread seating style hex etc.) to match both your vehicle and wheel requirements (Car Reference). Or contact our Customer Service Team to verify a safe and proper fitment.
  • HIGH QUALITY - Triple chrome plating with essential layers of copper nickel and chrome to provide exceptional strength beauty and corrosion resistance. Manufactured with cold forged and heat treated steel for dependable strength and durability, paint will not fall off easily.
  • INCLUDES - 20 Closed End Bulge Acorn Lug Nuts 12x1.5 with 1 Key. Shipped in our signature premium special design packaging.
  • 24-Month Warranty - Every wheel nuts 12x1.5 we sent out by our is rest assured that your product is backed by 45-Day Money Back Guarantee and 24-month warranty. Please rest assured to purchase.




Buy extended studs 12x2 from Amazon.com


MotoFab Lifts F150-2.5 - 2.5" Front Leveling Lift Kit That Will Raise The Front Of Your F150 2.5"

Buy extended studs 12x2
Check Price on Amazon
Buy extended studs 12x2 from Amazon.com

Description:

This lift kit will raise the front of your F150 by a true 2.5". Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits. They are CNC machined out of billet aluminum and then powdercoated black to match you factory suspension. The quality of this kit cannot even be compared to welded spacers that crack over time. These spacers are the strongest on the market and come with a 100 satisfaction guarantee and a lifetime warranty. It will come to you complete with all the hardware and instructions. Please note: Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.

Buy extended studs 12x2 from Amazon.com
  • Will Raise the front of your truck by a true 2.5"
  • Motofab Lifts are CNC machined out of billet aluminum then powdercoated black to match your factory suspension.
  • Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits.
  • Made In The USA with a Lifetime warranty
  • Fits 2004-2018 F150 2WD & 4WD

Buy extended studs 12x2 from Amazon.com


Gorilla Automotive 45038BC-20 Black 12mm x 1.50 Thread Size Forged Steel Chrome Finish Open End Lug Nut, (Pack of 20)

Buy extended studs 12x2
Check Price on Amazon
Buy extended studs 12x2 from Amazon.com

Description:

Gorilla Automotive Forged Steel Racing Lugs are designed for easy installation at the race track, and for great looks at the car show. Each lug is manufactured to exacting standards and polished and plated for beauty and durability.

Buy extended studs 12x2 from Amazon.com
  • Made from Forged Steel for strength and durability
  • Double knurled end for easy installation and removal
  • 3/4" Hex with Bulge Seat
  • Open End lugs allow for extended wheel studs
  • Includes 20 Lug Nuts

Buy extended studs 12x2 from Amazon.com


Cllena Dual Battery Selector Switch for Marine Boat Rv Vehicles

Buy extended studs 12x2
Check Price on Amazon
Buy extended studs 12x2 from Amazon.com

Description:

UV stabilized construction - Built to last in marine conditions
Easy to install - Comprehensive wiring diagram and installation

Specifications:
Voltage: 8V to 50V DC
Rated at 1000 Amps momentary, 200 Amps continuous at 12V DC
Base: 2.85" x 2.85" (72.5mm x 72.5mm)
Height: 2.90" (73.5mm)
Terminal studs: 10mm diameter

Please note: the package does not include the mounting bolts/hardware

Buy extended studs 12x2 from Amazon.com
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC
  • Can be used with 8V - 50V DC systems to isolate and secure the electrical system
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. Ignition protected
  • Terminal Stud Size: 3x5/16" (8mm), Instructions included: one Battery Switch (4 x bolts/hardware)







Buy extended studs 12x2 from Amazon.com


KSP M12x1.5 Spike Lug Nuts,20pcs 6 Spline 12mmx1.5 Thread 4.4" Tall Colsed End Bulge Acron Spiked Nuts with 1 Long Socket Key for Aftermarket Wheels

Buy extended studs 12x2
Check Price on Amazon
Buy extended studs 12x2 from Amazon.com

Description:

***KSP Performance "solid spike" Wheel Lug Nuts with High Quality Guarantee***

Fitment

All aftermarket wheels with studs requiring M12x1.5 thread pitch and take a conical 60 degree seat.
Jeep
2006-2017 compass MK
2007-2017 patriot

Dodge
2006-2010 Caliber PM
2007-2012 Nitro KJ

Acura
2016-2019 CDX
2001-2016 MDX
2006-2019 RDX
1995-1999 SLX

Lexus
2002-2019 GX
2014-2019 NX
1997-2019 RX

Ford
2003-2019 EcoSport
2007-2018 Endeavour
2001-2018 Escape
2007-2018 Everest
2008-2018 Kuga

Toyota
1989-2018 4Runner
1995-2018 Tacoma
2007-2018 FJ Cruiser
2001-2007 Sequoia
1999-2006 Cami
2005-2019 Fortuner
1982-1997 Land Cruiser
Tips choosing ideal lug nuts

Description:

1 pc design Solid spiked metal lug nuts not like others connected by thread and easy to be loosen.High quality carbon steel cold forged.CNC machined to keep better looks.
1 pc long Chromoly socket key to keep high torque for long nuts. This special socket key in every set creates an additional layer of security. Ordinary key can not remove these lug nuts. Socket key can be supplied if it is lost, Please feel free to contact us.
E-coated painting finish will not fall off easily. Hand torque recommended

Notice:

- Please check the size of nuts on your wheels before buying.
- Professional installation is highly recommended.
All of our Lugs are made of the Highest quality steel. They are secured with a 60 degree Conical seat for snug secure fit.BUY WITH CONFIDENCE!

Buy extended studs 12x2 from Amazon.com
  • New:New hot premium 6 spline spike extended metal solid lug nuts for aftermarket wheels. 20 pcs lug nuts (available in Black and M12X1.5 thread pitches) and 1 high precision machined socket key
  • Fitment: aftermarket wheels with studs requiring M12x1.5 thread pitch and take a conical 60 degree seat. Please check it carefully before purchasing
  • Specs: Thread pitch:M12x1.5; style:6 spline Spike Lug Nuts;Seat:Conical 60 Degree Seat;Width:22.8mm(0.9" hex);Overall length:4.4"; Thread length:50mm(2")
  • Feature:One piece construction design is more safely and reliable than two piece designs. Special socket key in every set creates an additional layer of security.This high quality socket made of 40 Chromoly with heat treated to avoid any crack
  • Material:Manufactured with high quality cold forged steel and heat treated for stronger and more durable to meet or exceed OEM Standards. Electrophoresis painting to prolong the rust prevention






Buy extended studs 12x2 from Amazon.com


Wheel Spacers for Toyota, KSP Forged 4Pcs 1.5" 6x5.5 to 6x5.5 Thread Pitch 12x1.5 Hub Bore 106mm 6 Lug 38mm Hub Centric Wheel Adapters for 4-Runner Tacoma Tundra FJ Cruiser Sequoia, 2 Years Warranty

Buy extended studs 12x2
Check Price on Amazon
Buy extended studs 12x2 from Amazon.com

Description:

***KSP Performance Wheel Spacers Adapters W/H High Quality Guarantee***


Please note some vehicles have short studs on their hubs, escipally toyota tacoma, 4 ruuner, fj cruise etc.. In order to safely install this wheel spacer, we can take one of the following ways to solve this problem. one is to change longer studs, another is to buy extended thread lug nuts with shank
SPEC:

Thickness: 1.5 inches / 38 mm
Vehicle Bolt Pattern: 6x5.5'' / 6x139.7 mm
Wheel Bolt Pattern: 6x5.5'' / 6x139.7 mm
Thread pitch: M12X1.5
Hub/Center Bore: 106 mm

COMPATABILITY:(Please check your vehicle compatibility BEFORE buying. If you don't make sure, please feel free to send messages to us):


2001-2018 Toyota Tacoma
2000-2006 Toyota Tundra
1995-2018 Toyota 4Runner
2007-2018 Toyota FJ Cruiser
2004-2018 Toyota Ventury
2001-2007 Toyota Sequoia
2005-2018 Toyota Fortuner
1982-1995 Toyota Land Cruiser
2003-2009 Lexus GX470
2010-2017 Lexus GX460
IMPORTANT NOTICES:

- It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle
- Be sure to torque the lug nuts to manufacturer specifications
- Avoid using an impact wrench; improper usage may cause damage to components
- Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
- No returns or exchange once installed
- Installation should only be performed by a trained professional

Buy extended studs 12x2 from Amazon.com
  • LUG-CENTRIC WHEEL SPACERS: Vehicle Bolt Pattern:6x5.5" (6x139.7mm), Wheel Bolt Pattern:6x5.5" (6x139.7mm), Hub Bore: 106mm, Spacer Thickness1.5"(38mm), Stud/Nut Thread Pitch: M12x1.5. Quantity: 4 pcs Forged Wheel spacer with 20 pcs open ended lug
  • REVOLUTIONARY DESIGN: Compared to the most of wheel spacers on the market, our Hubcentric Wheel Spacers with Wheel-Centric Lip. It will fit perfectly over your hub - eliminating possibility of vibrations, No impurity on the inner of hub. They also increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires.
  • PROUDLY IMPROVEMENT: Machine-manufactured precisely from 6061-T6 aircraft-grade aluminum billet, with heat-treated and hardened 10.9 grade bolts pre-installed. The anodized surface provides additional resistance to corrosion. Extraordinarily strong and light compared to spacers made of steel.
  • UNIVERSAL FITMENT:2001-2018 Toyota Tacoma, 2000-2006 Toyota Tundra,1995-2018 Toyota 4Runner,2007-2018 Toyota FJ Cruiser,2004-2018 Toyota Ventury,2001-2007 Toyota Sequoia,2005-2018 Toyota Fortuner,1990-1995 Toyota Land Cruiser, 2003-2009 Lexus GX470, 2010-2017 Lexus GX460, (And please Verify your vehicle compatibility in Product Description BEFORE purchasing.)
  • 100 SATISFACTION GUARANTEE: Please note some vehicles have short studs on their hubs, escipally toyota tacoma, 4 ruuner, fj cruise etc. In order to safely install this wheel spacer, we can take one of the following ways to solve this problem. one is to change longer studs, another is to buy extended thread lug nuts with shank(MPN:12x1.5-N1215-20104BK ).We are committed to business integrity quality after-sales guarantee. 2 years warranty!






Buy extended studs 12x2 from Amazon.com


YITAMOTOR Wheel Spacers 6x5.5, 2" Forged Hubcentric Wheel Adapters Compatible for Toyota Tacoma/4Runner/Tundra/FJ Cruiser/Isuzu/Lexus

Buy extended studs 12x2
Check Price on Amazon
Buy extended studs 12x2 from Amazon.com

Description:

Q: WHY CHOOSE YITAMOTOR?

A: YITAMOTOR adheres to the principle of safety first. We follow the 5 "musts"

1. Must use 6061-T6 aluminum forged alloy material as international standards, and the mechanical properties are much higher than other products in the market.

2. Must use CNC automatic processing, and the dimensional accuracy is 0.02mm, ensuring processing accuracy and stability. (Unlike other products in the market, many factory processes are manually processed. Even if the bolt specifications themselves meet the requirements, there will be improper handling of the bolts, causing the bolts to break off.)

3. Must use SCM435 high intensity alloy steel to ensure product quality.

4. Must pass the SGS standard test report to achieve true trustworthiness and security. (These nuts pass the 72-hour neutral salt spray test and it won't easily rust within 6 years. The bolts pass the standard tensile strength test and the 1 million fatigue test to ensure the hardness and toughness are in line with the standard)

5 Must adhere to the 5-year warranty,because our products stand the test of time.

Q: What should I pay attention to during installation?

A: Thanks for asking such a great question.For attentions, please refer to asin B07G54P6G2







Buy extended studs 12x2 from Amazon.com


Extended studs 12x2