Tripp lite rack cooling remote monitoring

TRIPP LITE Remote Control Cooling Management SNMP SRCOOL7KRM Rack Cooler(SRCOOLNET2)

Buy tripp lite rack cooling remote monitoring
Check Price on Amazon
Buy tripp lite rack cooling remote monitoring from Amazon.com

Description:

The SRCOOLNET2 SNMP/Web Interface Card adds remote monitoring and management capabilities to select Tripp Lite air conditioning units, including the SRCOOL7KRM. By installing the SRCOOLNET2 into the units accessory slot, you will be able to control the cooling unit over the Ethernet network from any location via SNMP, SSH, telnet or web browser. Monitor temperatures, adjust fan speed, and activate dehumidification modes. You can also review logs remotely and receive alerts. LEDs confirm network connection, speed and card initialization. The included ENVIROSENSE module connects to the SRCOOLNET2s PS/2 port to monitor temperatures and humidity up to 12 feet away from the primary unit, allowing its operation to be based on the intake air temperature where the sensor is mounted. The ENVIROSENSE also lets you monitor smoke detectors, fire alarms and security systems through a dry-contact interface.

Control Your Cooling Unit from Anywhere
  • Turn select in-rack(such as Tripp Lite SRCOOL7KRM) and portable air conditioning units into a managed network device
  • Access unit via SNMP, SSH, telnet or web browser
  • Monitor temperatures
  • Adjust fan speed
  • Activate dehumidification modes
  • Review logs
  • Receive alerts
  • LEDs confirm network connection/speed and card initialization
Includes ENVIROSENSE Temperature/Humidity Sensor Module
  • Monitors temperature and humidity up to 12 ft. away
  • Controls smoke detectors, fire alarms and security systems via dry-contact interface
  • Connects easily to SRCOOLNET2s PS/2 port
Easy to Set Up and Manage
  • Installs easily into cooling units front SNMP accessory slot
  • Included PowerAlert software interface provides single display for controlling cooling units and ENVIROSENSE modules
  • 2-year limited warranty

Buy tripp lite rack cooling remote monitoring from Amazon.com
  • Enables remote management of Tripp Lite SRCOOL7KRM air conditioning unit
  • Controls temperature, fan speed and dehumidification modes
  • Sends alerts in case of power failure, high temperature, etc.
  • Installs easily in unit's accessory slot
  • Includes ENVIROSENSE temperature and humidity sensor
  • Access unit via SNMP, SSH, telnet or web browser
  • 2-year limited warranty

Buy tripp lite rack cooling remote monitoring from Amazon.com


Tripp Lite Rack Cooling in Row Air Conditioner SRCOOL33K

Buy tripp lite rack cooling remote monitoring
Check Price on Amazon
Buy tripp lite rack cooling remote monitoring from Amazon.com

Description:

Tripp Lites SRCOOL33K is a computer room air conditioner meant for general computer room area cooling or supplemental cooling for large server rooms. The SRCOOL33K uses a new compressor technology that drastically cuts the energy consumption over a standard air conditioning model. It uses an inverter driven DC (direct current) variable speed compressor. A typical air conditioner uses an AC (alternating current) compressor that is either 100 on or 100 off. Each time the compressor turns on there are enormous in-rush current spikes. The unit runs for several minutes to cool the space then turns completely off. This start/stop sequence is not the most efficient way of running. Tripp Lite uses the inverter driven, variable speed, DC compressor technology. During start-up the SRCOOL33K has a slow-start feature that spools the compressor up slowly. This prevents the high in-rush current spike seen in AC driven compressors. Another feature is that it doesnt need to run full on, then full off. The SRCOOL33K starts off at approximately 25 of its max cooling capacity. After two minutes, based on temperature and airflow readings, the unit steps up to 50 of max capacity. After an additional 2 minutes,if the current cooling capacity its running at is not sufficient, it increases again to 75 of max capacity. It will continue to increase to 100 of max cooling capacity after another two minutes if needed. This way you are only running the unit as high as needed without overkill (like a typical AC compressor thats at 100 all the time when on.) Once the room starts cooling from these step levels the unit, again from temperature and pressure readings, starts to throttle down to a lower level. It chooses this level and constantly adjusts to simply maintain the cool in the room. Again, no start and stop like typical units. Just a slow steady cruise control rate to maintain the room environment.

Buy tripp lite rack cooling remote monitoring from Amazon.com
  • 33,000 BTU of cooling power
  • Variable-speed, DC-inverter-driven compressor and microprocessor-controlled electronic expansion valve (EEV) enable precision cooling adjustments--no more wasteful, noisy cycling between off and full blast
  • Soft-start feature limits inrush current to prevent introduction of line noise, voltage disruptions and potential circuit overloads
  • Self-contained, zero-maintenance unit re-humidifies condensate and expels it through the exhaust air stream, no floor drain, water collection tank, external condenser, refrigerant piping, duct work or plumbing required
  • Convenient LCD control panel and network interface provide local and remote monitoring and control of temperature, humidity, fan speed, alarms and logging via front-panel buttons, SNMP, Web, telnet or Modbus
  • Row-based airflow path maximizes hot-aisle/cold-aisle efficiency and cooling predictability by supplying cold intake air high in the cold aisle and removing hot equipment exhaust air high in the hot aisle
  • put, 50/60 Hz frequency compatibility












Buy tripp lite rack cooling remote monitoring from Amazon.com


Tripp Lite Portable Cooling Unit Air Conditioner, AC, 18K BTU (5.275 kW), 208/240V 20A, L6-20P Plug (SRCOOL18K)

Buy tripp lite rack cooling remote monitoring
Check Price on Amazon
Buy tripp lite rack cooling remote monitoring from Amazon.com

Description:

The SRCOOL18K SmartRack 18,000 BTU 208/240V Portable Air Conditioning Unit cools, dehumidifies and filters the air in your server room, data center or other environment with heat-sensitive equipment. The compact, portable unit fits into just 4 square feet of floor space. It is designed for primary, supplemental or backup cooling of IT equipment to prevent shutdowns, malfunctions and costly downtime caused by overheating or fluctuating temperatures.

The self-contained SRCOOL18K packs 18,000 BTU/h(5.275 kW) of cooling capacity into a rack-width chassis. A built-in evaporator expels condensation through a directional exhaust duct, eliminating the need for a floor drain or water collection tank. The SRCOOL18K also dehumidifies and filters the air, providing better air quality that can enhance equipment performance. Efficient close-coupled cooling reduces energy use and operating costs.

Installation is quick and easy and does not require disruptive construction or the costly expense of hiring a plumber or HVAC specialist. The SRCOOL18K rolls into place on durable built-in casters. The NEMA L6-20P plug connects to a standard 208/240V 20A outlet. The unit restarts automatically after power failures, and a built-in timer supports unattended shutdown and startup.

By installing the optional SRCOOLNET2 network management card(sold separately), you can monitor temperatures, receive alerts, review logs, automate operation and control settings from anywhere via SNMP, web browser, SSH or telnet. The SRCOOLNET2 includes the ENVIROSENSE remote sensor, which lets you monitor temperature and humidity up to 12 feet away from the SRCOOL18K.

1-year limited warranty

Buy tripp lite rack cooling remote monitoring from Amazon.com
  • Produces 18,000 BTU/h(5.275 kW) of cooling capacity in a portable, rack-width chassis
  • Prevents equipment shutdowns, malfunctions and failures caused by overheating and temperature fluctuations
  • Filters and dehumidifies air to enhance equipment performance
  • Uses environmentally friendly R410A refrigerant, which complies with worldwide standards
  • Efficient close-coupled cooling reduces energy use and operating costs
  • Adjustable louvers support area cooling applications
  • Optional SRCOOLNET2 accessory(sold separately) allows remote monitoring of temperatures, alerts, logs and control settings from anywhere via SNMP, web browser, SSH or telnet
  • 1-year limited warranty





Buy tripp lite rack cooling remote monitoring from Amazon.com


Tripp lite rack cooling remote monitoring